...
Although xHP Flashtool for Windows has been extensively tested on a variety of devices with no problems, there may be system configurations that don't provide the experience we are aiming for. Please follow our general guidelines and the minimum specifications below. If you experience any problems running xHP Flashtool for Windows on your computer, please don't hesitate to contact us at support@rbttuning support@xautomotive.com.
Minimum specifications
Processor: x86 or x64, Intel Core i3 (sixth generation or newer) or equivalent
Operating System: Windows 10 Version 1809 (OS build 17763) or higher
Your version of Windows must support the .msixbundle package format in order to install xHP Flashtool for Windows. Check the link below if you are unsure:
RAM: 4 GB
Internet: An Internet connection is required to log in, unlock licenses, and download resources
...
Warning |
---|
The DCAN-cable cannot be used to unlock and then flash the 3rd generation 8HP transmission in G-Series BMWs and the new Supra. Please use the Those need a DCAN Wi-Fi Adapter, BM3 Wi-Fi orMHD UNI adapter.. |
...
DCAN Wi-Fi Adapter
Simply connect Connect to one of the supported DCAN Wi-Fi adapters as you would to a regular Wi-Fi network. The supported adapters are
...
Info |
---|
Possible issues with the Wi-Fi Connection Ensure that only one device (phone/tablet/laptop) is connected to the WiFi adapter at a time. Multiple devices connected to the same static IP will cause network conflicts. The device appears to be correctly connected to the WiFi adapter, but your car does not appear to be connected in the app. |
...
ENET Cable
Simply plug Plug the Ethernet cable into the Ethernet port on your computer. In some casesSometimes, the connection may not work immediately, and additional network settings may be required. Sometimes, unused Windows network adapters interfere with the connection and need to be disabled.
If you don't know which network adapters to disable, you can try disabling disable all network adapters except the Ethernet adapter and see if the connection works. You can then re-enable the network adapters to find out determine which ones are causing the problem.
...
More information about the ENET cable can be found here.
Warning |
---|
The ENET - cable cannot be used to unlock and then flash the 3rd generation 8HP transmission in G - Series BMWs and the new Supra. Please use the DCAN Those need a DCAN Wi-Fi, BM3 Wi-Fi AdapterorMHD UNI adapter. Theoretically, you could use an ENET cable once you have unlocked after unlocking your transmission. However, if you need to unlock the transmission in the future, e.g. after uninstalling xHP or a software update, you will need a DCAN -WiFi Wi-Fi, BM3 Wi-Fi orMHD UNI adapter again. |
...
ENET Wi-Fi Adapter
Simply connect to Connect the ENET WiFi adapter as you would to a regular WiFi network. In some casesSometimes, the connection may not work immediately, and additional network settings may be required. Sometimes, unused Windows network adapters interfere with the connection and need to be disabled.
If you don't know which network adapters to turn off, you can try turning off all network adapters except the Wi-Fi adapter and see if the connection works. You can then re-enable the network adapters to find out which ones are causing the interference.
...
Info |
---|
Possible issues with the Wi-Fi Connection Ensure that only one device (phone/tablet/laptop) is connected to the WiFi Wi-Fi adapter at a time. The device appears This may cause your device to appear to be correctly connected to the WiFi Wi-Fi adapter, but even though your car does may not appear to be connected in the app or you may not be able to flash. |
Warning |
---|
The ENET Wi-WiFi adapter Fi adapters cannot be used to unlock and then flash the 3rd Generation generation 8HP transmission in G - Series BMWs and the new Supra. Please use the DCAN Those need a DCAN Wi-Fi, BM3 Wi-Fi AdapterorMHD UNI adapter. Theoretically, you could use an ENET WiFi adapter once you have unlocked cable after unlocking your transmission. However, if you need to unlock the transmission in the future, e.g. after uninstalling xHP or a software update, you will need a DCAN -WiFi Wi-Fi, BM3 Wi-Fi orMHD UNI adapter again. |
...
Back to the Overview Page.