Yes, xHP does work together with every engine tune. The most common engine tune-Apps are:
MHD - Does have a checkbox that needs to be ticked, to ensure optimal performance, see the next question below.
BM3 - Works out of the box with xHP and with Stage 2 and higher, BM3 also recommends to use xHP Flashtool, together with their engine tunes.
MGFlasher - Does work out of the box as well.
See our article about line-pressure for more in-depth details, regarding communication between ECU and TCU.
For most cars MHD offers a dedicated “xHP Transmission Setting”. In all other cases just select “Manual Transmission” in MHD. (yes, this is not a typo)
No. xHP has no direct effect on your existing Engine tune.
Yes, xHP will work on JB4 equipped cars, but you have to remove it before flash and install again. On our test cars setting JB4 to Map 0 was not enough, as JB4 was still disturbing communication to the TCU. This possibly depends on the JB4 revision you are using.
Back to the xHP Flashtool - FAQ - Overview Page.
Back to the Overview Page.