...
More information about the DCAN Cable can be found here.
| Warning |
|---|
The DCAN-cable cannot be used to unlock and then flash the 3rd Generation 8HP transmission in G-Series BMWs and the new Supra. Please use the DCAN Wi-Fi Adapter. Theoretically you could use an ENET cable after unlocking your transmission. Should you however need to unlock the transmission in the future, like after uninstalling xHP or a software update, you will need a DCAN-WiFi adapter again. |
...
DCAN Wi-Fi Adapter
Just connect to one of the supported DCAN Wi-Fi Adapters, as you would connect to a regular WiFi network. The supported adapters are:
...
More information about the DCAN Wi-Fi Adapter can be found here.
| Warninginfo |
|---|
Possible Wi-Fi Connection issues with Windows 11 The device shows a successful connection to the Wi-Fi Adapter, but a connection to the car is not possible. This happens due to an incompatible assigned IP address by the operating system. Quick fix Unplugging the Wi-Fi adapter does NOT work. Now a compatible IP should be assigned and you should be able to connect to the car Make sure to connect only one device (phone/tablet/laptop) at the time to the WiFi adapter. Having multiple devices connected using the same static IP will cause network conflicts. The device would seem to be connected correctly to the WiFi adapter, but your car would not show up as connected in the app. |
...
ENET Cable
Just plug in your ENET Cable to the Ethernet port on your computer. In some cases, the connection will not work straight away and additional network settings are required. Sometimes unused Windows network adapters interfere with the connection and must therefore be deactivated. If you don’t know which network adapters to deactivate, you can try to deactivate all network adapters except the Ethernet adapter and see if the connection works. You can then re-activate the network adapters to find out which causes the interference.
...
More information about the ENET cable can be found here.
| Warning |
|---|
The ENET-cable cannot be used to unlock and then flash the 3rd Generation 8HP transmission in G-Series BMWs and the new Supra. Please use the DCAN Wi-Fi Adapter. Theoretically you could use an ENET cable after unlocking your transmission. Should you however need to unlock the transmission in the future, like after uninstalling xHP or a software update, you will need a DCAN-WiFi adapter again. |
...
ENET Wi-Fi Adapter
Just connect to the ENET WiFI Adapter as you would to a regular WiFi network. In some cases, the connection will not work straight away and additional network settings are required. Sometimes unused Windows network adapters interfere with the connection and must therefore be deactivated. If you don’t know which network adapters to deactivate, you can try to deactivate all network adapters except the WiFi adapter and see if the connection works. You can then re-activate the network adapters to find out which causes the interference.
...
More information about the ENET Wi-Fi Adapter can be found here.
...
| Info |
|---|
| Warning |
Possible Wi-Fi Connection issues with Windows 11 The device shows a successful connection to the Wi-Fi Adapter, but a connection to the car is not possible. This happens due to an incompatible assigned IP address by the operating system. Quick fix Unplugging the Wi-Fi adapter does NOT work. Now a compatible IP should be assigned and you should be able to connect to the car Make sure to connect only one device (phone/tablet/laptop) at the time to the WiFi adapter. Having multiple devices connected using the same static IP will cause network conflicts. The device would seem to be connected correctly to the WiFi adapter, but your car would not show up as connected in the app. |
| Warning |
|---|
The ENET-WiFi adapter cannot be used to unlock and then flash the 3rd Generation 8HP transmission in G-Series BMWs and the new Supra. Please use the DCAN Wi-Fi Adapter. Theoretically you could use an ENET cable after unlocking your transmission. Should you however need to unlock the transmission in the future, like after uninstalling xHP or a software update, you will need a DCAN-WiFi adapter again. |
...
Back to the Overview Page.